Uncertified Cordless Caplamps
Certified Helmet Lamps for Petrochemical
Charging Banks
> CB53E: For KC3E-Ex & KH3E-Ex
> CB35E: For KC3E-Ex & KH3E-Ex
> CB8E: For KC3E-Ex & KH3E-Ex
> CB53: For other lamps
> CB35: For other lamps
> CB8: For other lamps
> Charging bank accessories
Lamp Accessories
Mining Torches
Helmet & Attachments
Pneumatic Membrane pump

  CB8E: Dual Power 8-Unit Charging Bank for KC3E-Ex & KH3E-Ex  

CB8E Dual-Power Charging Bank is a wall mounting charging facility to charge 8 units of KC3E-Ex Cordless Caplamps and KH3E-Ex Helmet Lamps with either 240V AC mains power or via the cigarette lighter in any vehicle with 12/24V DC vehicle power. You can also can power CB8E with any standard 12~24V DC power supply >30W.. It is compact, light weight, high capacity, low current, safe and easy to use. After starting the charging process, no further attention is needed as the automatic over-load protection function in each charging unit will cut off that circuit when the battery is fully charged.

Typical Applications

  • Rescue operations: Back at the base, it can be connected to the mains power to charge the lamps and also keep the lamps in stand-by state. If in a fire-rescue truck or other mobile site, the lamps can be charged from the cigarette lighter in the truck.
  • Mines: Any applications with small groups of lamps such as a small mine, CPP or workshop. In remote operations where the mains power is not available such as drilling, charging lamps also can be performed in a fresh-air area underground where the 240V AC power is not convenient.
  • General situations: Contractors, specialised personnel, admin, visitor requirements, etc, that is for any situation that requires convenience, flexibility, and portability.


  • Powered by either main power of truck cigarette lighter
  • Powered by low voltage DC
  • Compact and light weight
  • Easy to carry
  • Easy to install in a truck

Package contents

  • Mians power cord to connect to the Mains outlet
  • Low power cord to connect to the vehicle cigarette lighter of a car or a truck.
  • Instruction


Charging Unit

Input 1 90~265VAC
Input 2 12~24VDC
Output to lamps 5.1VDC/500mA
Power consumption < 30W
Weight 1.1 Kg

Locking Plate - Optional Accessory

The separate Locking Plate can be mounted on the back of the CB8E, allowing each individual lamp to be locked onto the plate, offering greater security from theft. There are 2 different types of Locking Plates for different lamp clips. Please specify whether your lamp clips are U-Shape clips or the standard type, when ordering.

Package contents:
1 Plate & 8 Padlocks

CB8E-LPU for lamps using U-Shape lamp clips
CB8E-LPS for lamps using standard lamp clips

Locking panel Locking panel